.jpg)
LEACHATE WATER TREATMENT SYSTEM
The HIDROWELL-C1-80 system is designed for leachate treatment with a capacity of 80 m³/day, using a two-stage reverse osmosis process. It reduces TDS from up to 38,000 mg/L to below 2,500 mg/L and operates at a pressure of up to 65 bar with a specific energy demand of 5.2 kWh/m³. Housed in a 40-foot container, it features PLC control and treats water to meet strict quality standards for pH, COD, BOD, and ammonia.
related groups :
tags :
description
| Section | Parameter | Value |
|---|---|---|
| Model Information | Type | HIDROWELL-C1-80 |
| Installation | In 40’ HC container | |
| Dimensions | 12,192 x 2,438 x 2,896 mm | |
| Weight (Net/Gross) | 5,800 / 9,500 kg | |
| Application | Leachate water treatment | |
| Operating Parameters | Leachate water volume | 80.0 m³/day |
| Treated water volume | 40.0 – 48.0 m³/day | |
| Effluent volume | 32.0 – 40.0 m³/day | |
| Recovery | 50 – 60 % | |
| Design temperature | 20 °C | |
| Operating temperature | 15–35 °C | |
| Design pressure | 80 bar | |
| Operating pressure | 65 bar | |
| Specific energy demand | 5.2 kWh/m³ | |
| Inlet water pressure | 2.5 – 5.0 bar | |
| Permeate pressure | Max. 1 bar | |
| Construction | Pre-treatment tank | 4.0 m³ / PP |
| Homogenizing pump | CRN 5-5 | |
| Booster pump | CRNE 5-7 | |
| Chemical dosing unit | HF-VA-ST/C 6-10 | |
| Sand filter | HF-MMF-760 A/T | |
| Fine filter element | 5 µm filter cartridge | |
| RO Unit Stage 1 | HF-RO-4.0 DT | |
| RO Unit Stage 2 | HF-RO-3.0 ST | |
| Treated water tank | 3.0 m³ / PP | |
| High pressure piping | EN 1.4401 | |
| Low pressure piping | PVC or PP or SS | |
| Additional equipment | Control instrumentation, Motor switch box, CIP unit | |
| Leachate Quality | pH | 7.5 – 8.5 |
| Conductivity | 41,000 – 45,000 µS/cm | |
| TDS | 35,000 – 38,000 mg/L | |
| TSS | 50 – 250 mg/L | |
| COD | ≤ 10,000 mg/L | |
| BOD | ≤ 5,000 mg/L | |
| Treated Water Quality | pH | 6.5 – 9.0 |
| TDS | < 2,500 mg/L | |
| COD | < 500 mg/L | |
| BOD | < 250 mg/L | |
| NH₃ (Ammonia) | < 50 mg/L | |
| Effluent Quality | pH | 7.0 – 8.0 |
| TDS | 60,000 mg/L | |
| Connection | Inlet | DN 50 |
| Treated water | DN 40 | |
| Effluent | DN 100 | |
| Electric supply | 3 × 415 V; 50 Hz | |
| Installed electric power | 35.0 kW | |
| Energy demand | 22.5 kW | |
| Control | Controller | PLC |
| Communication | Modbus | |
| Display | Status, Function parameters, Error signals |